My name is Jay Markoff and I am the Inventor of the “NO GLUE” Billboarder Banner Framing System
USA PATENTED # 8.096.070
An all Aluminum Banner Holding Framing System
That turns to Sides of any Box-Truck into 2 BIG Billboards
Far better than Glued to the Truck Method of Application
It gives you an EZ way to Change Ads
No Scraping old ads off
Price for 2 Sides… $699 w/US $3000 with Glued-on
Price to Change Ads $300 w/US (for 2 Newly Designed Banners)
With Glue- On Ads $200 to Scrape the old ads off +
$3000 for another for a re-wrap glued on job $3200
Here is My FREE ARTWORK DEAL
to Box-Truck Owners!
We Create FREE ARTWORK for Your Company,
That goes on the 2 Big BILLBOARD-Like SIDES of Your Box-Truck
Without Any Obligation to Buy Anything!
Then we will Super Impose Your Companies
“FREE” Newly Created Artwork
Onto a Photo of a Box-Truck, and E-Mail Your Artwork
to you, so you can see, what your Truck will look like
with your Big Customer Catching Ads,
That will be seen by Thousands of Potential customers
Everywhere your Box-Truck Drives or Parks,
Everyday for Pennies a day. Yes,, About 70 pennies A DAY!
We take most Credit Cards
Our Patented Frames are
Made of Rust-Proof, Anodized “Forever” Aluminum
A $698 Order for Frames and Banners
Over the next 3 years (a little more than a 1000 DAYS)
will Only cost 70 cents a Day!
$698 Divided by 1000 Days = 70 cents a Day!
Banners Last about 3 years (about 1000 DAYS)
cost $300 for 2 BANNERS, SO…
…$300 Divided by 1000 DAYS = 30 CENTS A DAY!
To have us make up and Email you
Your Companies FREE Box-Truck Artwork
With NO OBLIGATION to buy Anything!
Simply, Email Us at… Alex@BoxTruckAds4U.com
Include: Your Name, Company Name, Telephone # Website
You will receive your Artwork in 2 days.
If you want changes NO PROBLEM!
We are not a “Bot Run company”
We have real people to talk to
619 644-1564 our customers are in every state,
We are in San Diego Pacific Time, 9 to 4
(3 hours behind east coast) Love to talk to you!
Don’t let 70 cents a day, stop your companies
Advertising message from being seen
by Thousands of Potential Customers
Everywhere your Box-Truck Drives or Parks,
Everyday for Pennies a day. Yes About 70 pennies A DAY!
We take Most Credit Cards
Now Please Read All About my Framing System Below
Start with the Video!
Click on the short 30 second video below to see lots of Trucks done with the Billboarder Banner Framing System
USA Patent Number 8.096.070
Click Below to Play Video
BoxTruckAds4U.com
Billboarder Banner Framing System Pricing
(619) 644-1564
Read what others are saying about us
AFTER INSTALLING MY FIRST SYSTEM I CAME TO SEE THE BRILLIANCE OF IT ALL. IT IS BY FAR THE BEST METHOD BY WHICH YOU CAN STRETCH A VINYL BANNER, AND I KNOW BECAUSE I HAVE TRIED STRETCHING BANNERS FOR YEARS!“
Humberto
Owner of JReyno Signs
Here is a short overview of how the Billboarder Banner Framing System works.
For more detailed instructions with pictures, scroll down and click the red written instructions button on the right.
It’s simple. The patented Billboarder Framing System™ comes in 8-foot lengths. Each 8-foot length comes in two pieces; the base plate and the capping plate. Self-tapping screws and compression rubber gaskets are also included.
Using the long screws provided, you attach the base plate to the truck or interior or exterior wall. You insert the compression rubber gaskets into the gasket trap of the base plate; you only need to insert the gaskets the first time you install the base plate, not every time you change the banner. You temporarily tape the banner to the base plate with super-easy-to-remove duct tape. You hook the anodized capping plate onto the outside edge of the base plate, and screw the capping plate to the base plate using the short screws provided.
The compression rubber gaskets are what holds and traps the banner tightly and securely (duct tape is just used to temporarily hold banner so you can get the capping plate on). The compression rubber works by compressing the banner against the capping plate, and holds and traps the banner securely. The short screws bring the inside edge capping plate completely down to the wall, tightening the banner. You’re done with your initial installation!
Changing banners is easy, and a major feature of the Billboarder Framing System. Just remove the capping plate, undo the duct tape by pulling the banner off, roll up the old banner for future reuse, and repeat the process above to install your new banner! For more detailed installation instructions Click Here
Billboarder Banner Framing System vs. Glue-On Graphics:
Much LESS COST AND TIME TO INSTALL than GLUE-ON GRAPHICS
THE BILLBOARDER BANNER FRAMING SYSTEM… can be installed by any handyman. No Professional Installer Needed, No Special Schooling Needed, only Tools Needed are a Phillips Head Screw Bit, a 1/4″ Hex Bit, an Electric Hand Drill, Caulking, and Duct Tape.
Installation time? About 1 to 2 hours per side First Time ONLY, Less than half that time for just banner change-outs after “first time” initial Base Plate Installation.
With GLUE-ON GRAPHIC TRUCK ADS, an Expensive Schooled Professional Installer and Special Tools are Needed. A Glue-On Graphics installation can take days and requires specialized tools and specific skills for installing GLUE-ON GRAPHIC TRUCK ADS. The average cost to put on glue-on graphics “called wraps” is around $2400, with the Billboarder Banner Framing System your cost for banners and frames (depending on size) will be between $399 to $599, for both sides of the truck.
Much Less Cost To Change Out Ads Than Glue-On Graphics
With the BILLBOARDER BANNER FRAMING SYSTEM you use inexpensive BANNERS. Depending on size approximately 2 to 4 hundred dollars cost for the banners. With GLUE-ON GRAPHIC TRUCK ADS it’s quite an expensive process, of tediously removing the old glued-on graphics and professionally installing the new graphics panel by panel. So add on the cost of removal, and then once again $2400 to apply the graphics.
This High cost to change out ads with Glue-On Graphics of course can inhibit one’s decision to change out their Truck Ads, even when a change is overdue!
Click on the installation video below to see how easily the Billboarder Banner Framing System is installed
Click the red button below for more detailed written instructions
Click on the animation below to see how the Billboarder Banner Framing System basically works
Much Easier To Remove Than Glue-On Graphics
With the BILLBOARDER BANNER FRAMING SYSTEM, Just unscrew the capping plates (this un-traps the banner from the compression rubber), pull the BANNER off, You’re Done!With GLUE-ON GRAPHIC TRUCK ADS, When it’s time to change the ad, you are left with a gluey mess to scrape off piece by piece “too much like removing wallpaper” it takes hours upon hours to totally remove a Glue-On Graphic. An installed Billboarder Banner Framing System increases the truck’s value!
Glue-On Graphics DECREASE the truck’s value. The Billboarder Banner Framing System is simply far better than Glue-On Graphics
Low 3/8 inch Profile, Lower Cost, EZ Installation and Change-outs,
Our USA Patented Design #8.096.070 now on trucks all over the USA!
Low-Cost Advertising Banner Chang-Outs makes the decision to change your ads Easy! Call Us Now for More Information or To Order. Better yet, Call Us and give us an idea of what you would like us to design for you, and we will design something for you for free, without any obligation for you to buy anything.
Please feel free to call us 619-644-1564
Thanks Box Truck Ads 4U a Division of Arturion Inc.