Skilled sign makers using the latest, most advanced equipment.
Click on the short 30 second video below to see lots of trucks done with the Billboarder Banner Framing System
Dear Box Truck Owner
Signage for the “Large BILLBOARD-Like sides of your Box-Trucks”, at about one quarter the price of the usual Glued to the truck graphics, utilizing our USA Patented NO GLUE …
Billboarder Banner Framing System, USA Patent # 8.096.070
Now installed on over 1000 trucks throughout the USA! A number that’s growing every day, and here’s why.
To do both sides of your truck, will run you about $3000 with the usual, (but now outdated),
“Glued and Stuck to the Truck Old Method”,
And worse yet when it comes time to change your ads, with the glue to the truck of method, it will cost you another $3000 again -Plus the cost of Scraping the old glued -on ads off!
With this correspondence we are offering to do your artwork for Free and without any obligation on your part, to buy anything!
Compare the usual Glued on method’s average $3000 Price, to do a Box-Truck, to Our Price – $399
We will first do your Truck’s Artwork for Free, follow any suggestions in the artwork you would like,
and Email you a proof and hope you like it, if not will Email you proofs until you like it,
without any obligation, on your part, to buy anything!
And when it comes time to change your truck’s advertisements, instead of being left with a Glued-on mess to scrape off your Truck –
You have a beautiful, E-Z to change-out, anodized all aluminum, USA Patented, Framing System,
ready to receive the next 2 Banners at about only $150!
Compare that to $3000 every time you want to change your advertisements with the glued on method!
Here’s how you can have Great Advertising Artwork Created for Your Companies Trucks, done for Absolutely FREE
Without Any Obligation To Buy Anything!
Use your iPhone or Smartphone or any camera and take a picture of your truck.
Email that picture to:
Please include your Company name, Company telephone number, website address and anything else you would like to appear In your ad – LOGO PERHAPS?
Along with the best number to contact you.
Upon receipt of your trucks picture, we will then create and design a Gorgeous Photographic, Magazine Quality, Advertisement for the sides of your truck
so you can see how your Customer-Catching Advertisement will look and be seen by Thousands of Potential Customers –
Everywhere You Park or Drive your Truck, For Pennies A Day.
Below I have attached 2 pictures, both of the same truck. Most likely similar to yours.
One truck is blank. The other truck is shown with artwork superimposed on to the photograph of the blank truck. Only a Truck with Your Ads can bring you Business Everyday everywhere Parked or Driven!
Please take a similar picture of one side of your blank truck and email it to Julius@MPBanner.com.
As soon we receive your Trucks Photograph, we will create your artwork, superimpose it onto the picture of your truck and send back to you a Gorgeous, Customer-Catching, Artwork specifically created for your company! A $125 value!
all Free of Charge! Without any Obligation to buy anything!
You can learn more about our USA Patented Framing System
Invented by the President of our company Jay Markoff
Billboarder Banner Framing System Pricing
Read what others are saying about us
“After installing my first system I came to see the brilliance of it all. It is by far the best method by which you can stretch a vinyl banner, and I know because I have tried stretching banners for years!”
Here is a short overview of how the Billboarder Banner Framing System works.
For more detailed instructions with pictures, scroll down and click the red written instructions button on the right.
It’s simple. The patented Billboarder Framing System™ comes in 8-foot lengths. Each 8-foot length comes in two pieces; the base plate and the capping plate. Self-tapping screws and compression rubber gaskets are also included.
Using the long screws provided, you attach the base plate to the truck or interior or exterior wall. You insert the compression rubber gaskets into the gasket trap of the base plate; you only need to insert the gaskets the first time you install the base plate, not every time you change the banner. You temporarily tape the banner to the base plate with super-easy-to-remove duct tape. You hook the anodized capping plate onto the outside edge of the base plate, and screw the capping plate to the base plate using the short screws provided.
The compression rubber gaskets are what holds and traps the banner tightly and securely (duct tape is just used to temporarily hold banner so you can get the capping plate on). The compression rubber works by compressing the banner against the capping plate, and holds and traps the banner securely. The short screws bring the inside edge capping plate completely down to the wall, tightening the banner. You’re done with your initial installation!
Changing banners is easy, and a major feature of the Billboarder Framing System. Just remove the capping plate, undo the duct tape by pulling the banner off, roll up the old banner for future reuse, and repeat the process above to install your new banner! For more detailed installation instructions Click Here
Billboarder Banner Framing System vs. Glue-On Graphics:
Much LESS COST AND TIME TO INSTALL than GLUE-ON GRAPHICS
THE BILLBOARDER BANNER FRAMING SYSTEM… can be installed by any handyman. No Professional Installer Needed, No Special Schooling Needed, only Tools Needed are a Phillips Head Screw Bit, a 1/4″ Hex Bit, an Electric Hand Drill, Caulking, and Duct Tape.
Installation time? About 1 to 2 hours per side First Time ONLY, Less than half that time for just banner change-outs after “first time” initial Base Plate Installation.
With GLUE-ON GRAPHIC TRUCK ADS, an Expensive Schooled Professional Installer and Special Tools are Needed. A Glue-On Graphics installation can take days and requires specialized tools and specific skills for installing GLUE-ON GRAPHIC TRUCK ADS. The average cost to put on glue-on graphics “called wraps” is around $2400, with the Billboarder Banner Framing System your cost for banners and frames (depending on size) will be between $399 to $599, for both sides of the truck.
Much Less Cost To Change Out Ads Than Glue-On Graphics
With the BILLBOARDER BANNER FRAMING SYSTEM you use inexpensive BANNERS. Depending on size approximately 2 to 4 hundred dollars cost for the banners. With GLUE-ON GRAPHIC TRUCK ADS it’s quite an expensive process, of tediously removing the old glued-on graphics and professionally installing the new graphics panel by panel. So add on the cost of removal, and then once again $2400 to apply the graphics.
This High cost to change out ads with Glue-On Graphics of course can inhibit one’s decision to change out their Truck Ads, even when a change is overdue!
Much Easier To Remove Than Glue-On Graphics
With the BILLBOARDER BANNER FRAMING SYSTEM, Just unscrew the capping plates (this un-traps the banner from the compression rubber), pull the BANNER off, You’re Done!
Glue-On Graphics DECREASE the truck’s value. The Billboarder Banner Framing System is simply far better than Glue-On Graphics
Low 3/8 inch Profile, Lower Cost, EZ Installation and Change-outs,
Our USA Patented Design #8.096.070 now on trucks all over the USA!
Low-Cost Advertising Banner Chang-Outs makes the decision to change your ads Easy! Call Us Now for More Information or To Order. Better yet, Call Us and give us an idea of what you would like us to design for you, and we will design something for you for free, without any obligation for you to buy anything.